Rear Floor Heat Duct Replacement

REMOVAL
1. To remove the rear floor ducts from the vehicle, remove the knee blocker panels for access, and pull carpeting back.

Fig.8 Rear Floor Ducts:

2. Pull the floor ducts from the HVAC housing.

NOTE: The ductwork running from the HVAC housing rearward through the passenger compartment is molded into the carpeting, and must be replaced as a unit if damaged.

INSTALLATION
1. Attach the floor ducts to the HVAC housing.
2. Install the knee blocker panels.
3. Install the carpeting back in its original position.