Seat Track And Recliner Assembly

SEAT TRACK AND RECLINER ASSEMBLY

REMOVAL

1. Remove seat back.
2. Disengage J-strap at base of seat back.
3. Roll seat back cover upward to access bolts attaching recliner to seat back frame.
4. Remove bolts attaching recliner to seat back frame.
5. Separate recliner from seat back.

INSTALLATION

1. Position recliner on seat back.
2. Install bolts attaching recliner to seat back frame and tighten to 28 N.m (20 ft.lbs.).
3. Roll seat back cover downward.
4. Engage J-strap at base of seat back.
5. Install seat back.