Front Seat Cushion / Cover

FRONT SEAT CUSHION/COVER

REMOVAL

1. Remove seat from vehicle.
2. Remove seat back.
3. Disengage J-straps attaching cushion cover to seat cushion frame.

Fig. 6:

4. Disengage hog rings attaching cushion cover to cushion frame at rear of seat along bottom of cushion cover (Fig. 6).
5. Roll up edges of cover and route seat function switches through access hole on outboard side of seat cushion, if equipped.
6. Disengage seat cushion heater element connector, if equipped.
7. Disengage hog rings attaching cover to cushion along cover insert.
8. Separate seat cushion cover from seat cushion.

INSTALLATION

1. Position seat cover on cushion.
2. Engage hog rings attaching cushion cover to cushion along insert.
3. Engage seat cushion heater element connector, if equipped.
4. Route seat function switches through access hole on outboard side of seat cushion, if equipped.
5. Engage J-straps attaching cushion cover to seat cushion frame.
6. Engage hog rings attaching cushion cover to cushion frame.
7. Install seat back.
8. Install seat.