Front Seat Back Cover

FRONT SEAT BACK COVER

REMOVAL

1. Remove head restraint.
2. Using a trim stick C-4755 or equivalent, carefully pry head restraint release button caps from the top of seat back.
3. Remove seat back.
4. Disengage J-strap at base of seat back.

Fig. 5:

5. Slide hand between the face of the seat back pad and the cushion cover and carefully separate hook and loop fastener (Fig. 5).
6. Roll cover upward and disengage hog rings.
7. Roll cover upward to top of seat back.
8. Separate cover from seat back.

INSTALLATION

1. Position cover inside-out at the top of seat back.
2. Roll cover downward.
3. Engage hog rings.
4. Align seat back cover with hook and loop fasteners and secure.
5. Roll cover downward.
6. Engage J-strap at base of seat back.
7. Install seat back.

NOTE: The taller head restraint release button cap is positioned on the left hand side and the head restraint button cap with the hidden button is positioned on the right hand side.

8. Position head restraint release button caps on head restraint sleeves and press to secure.
9. Install head restraint.