Liftgate Opening Upper Trim

LIFTGATE OPENING UPPER TRIM

REMOVAL

The upper liftgate opening trim is held on with spring clips.

Fig. 13:

1. Grasp the rear of the trim piece and pull down and back to disengage clips (Fig. 13).
2. Slide the trim piece to the rear to disengage headliner locating hooks.

INSTALLATION

Fig. 14:

The liftgate upper opening trim piece is equipped with headliner locating hooks (Fig. 14).

1. Align the locating hooks with the slots in the headliner.
2. Engage the spring clips and press the liftgate upper opening trim panel into place.