LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Grand Cherokee 2WD V8-4.7L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Pedal Positioning System >> Pedal Positioning Motor >> Service and Repair >> Removal and Replacement

Removal and Replacement



PEDAL MOTOR

REMOVAL
1. Disconnect the negative battery cable.
2. Remove the cluster bezel.
3. Remove the steering column opening cover.






4. Remove the two mounting screws.
5. Disconnect the electrical connector.
6. Remove the adjustable pedal motor.

INSTALLATION
1. Install the adjustable pedal motor.
2. Reconnect the electrical connector.
3. Install the two mounting screws.
4. Install the steering column opening cover.
5. Install the cluster bezel.
6. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals