LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Grand Cherokee 2WD V8-4.7L >> Repair and Diagnosis >> A L L Diagnostic Trouble Codes ( DTC ) >> Testing and Inspection >> Manufacturer Code Charts >> Communications - Verbose Codes >> PDM Messages Not Received

PDM Messages Not Received

Test 1 - 2:






SYMPTOM
PDM MESSAGE NOT RECEIVED

WHEN MONITORED
With the ignition in run, and the IOD fuse installed.

SET CONDITION
The BCM does not receive any messages from the Passenger Door Module (PDM) for at least 30 seconds.

POSSIBLE CAUSES
- Attempt to communicate with the door modules
- Body control module