Drbiii Blank Screen
WARNING: This page is about a different car, the 2002 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
If DRBIII Screen is blank, disconnect DRBIII from data link connector. Inspect for loose wiring connections or damaged harness or connectors. Ensure continuity to ground exists at data link connector terminals No. 4 and No. 5. See Figure . Ensure at least 11 volts exists at data link connector terminal No. 16. If 11 volts does not exist, check for faulty circuit leading to DLC connector terminal No. 16. If no problem can be found, malfunction with DRBIII or DRBIII cable may be present.