LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2002 >> Wrangler X, Standard >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Disc Brakes & Drum Brakes >> Overhaul >> Master Cylinder >> Fluid Reservoir & Grommets (Grand Cherokee)

Fluid Reservoir & Grommets (Grand Cherokee)

  1. Remove reservoir cap, and empty brake fluid. Remove wire connector from brake fluid sensor.
  2. Loosen reservoir from grommets with a pry tool. Insert tool provided with reservoir to release reservoir retaining tabs. Pull reservoir straight up out of cylinder. Remove grommets. Lubricate new grommets with clean brake fluid. Using only finger pressure, install and seat grommets.
  3. Start reservoir in grommets. Press reservoir straight down to seat reservoir into grommets. Verify retaining tabs are seated. Install wire connector. Fill reservoir and bench bleed master cylinder. See MASTER CYLINDER BLEEDING  under BLEEDING BRAKE SYSTEM.
scientia non olet · About LEMON Manuals