LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2002 >> Wrangler Sahara, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Analog Instrument Panels >> System Tests >> Vacuum Fluorescent Display Self-Diagnostic Actuator Test >> Fault Information

Fault Information

VFD will display "noBuS" if there a loss of PCI data communication to the instrument cluster. VFD will display "noFuSe" if instrument cluster is not receiving battery voltage from Ignition-Off Draw (IOD) fuse. VFD will display "buS b0" if instrument cluster is not receiving a signal from the PCM. VFD will display "buS b1" if instrument cluster is not receiving a signal from the SKIM. VFD will display "buS b8" if instrument cluster is not receiving a signal from the Air Bag Control Module (ACM). VFD will display "PanEL OPEn" if instrument cluster is not receiving a panel lights dimmer signal from the multifunction switch. VFD will display "Airbag" if the instrument cluster Air Bag indicator light is open or shorted. For communication diagnostic information, see DIAGNOSTIC TROUBLE CODE IDENTIFICATION  or SYMPTOM IDENTIFICATION  table under SELF-DIAGNOSTIC SYSTEM.

scientia non olet · About LEMON Manuals