LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2002 >> Wrangler Sahara, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> Removal & Installation >> Cluster Hood & Mask >> Removal & Installation

Removal & Installation

  1. Disconnect battery negative cable.
  2. Remove instrument cluster from instrument panel. See INSTRUMENT CLUSTER  .
  3. Remove the cluster lens from the cluster housing. Work around the perimeter of the cluster hood and mask unit and disengage each of the latches that secure the cluster hood and mask unit to the cluster housing. See Figure . Gently pull the cluster hood and mask unit away from the cluster housing.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals