LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2002 >> Wrangler SE, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> Removal & Installation >> Cluster Housing Rear Cover >> Removal & Installation

Removal & Installation

  1. Disconnect and isolate battery cable. Remove instrument cluster. See INSTRUMENT CLUSTER  . Remove the 2 screws that secure the rear cover to the cluster housing.
  2. Work around the perimeter of the cluster housing rear cover and disengage each of the latches that secure the cover to the outside of the cluster housing. See Figure . Gently pull the cluster housing rear cover away from the back of the cluster housing.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals