Full Time Indicator

The full time indicator is located near the upper edge of the instrument cluster overlay, in the upper right quadrant of the cluster. The full time indicator consists of a stencil like cutout of the words "FULL TIME" in the opaque later of the instrument cluster overlay. The dark outer layer of the overlay prevents the indicator from being clearly visible when it is not illuminated. A Green lens behind the cutout in the opaque layer of the overlay the "FULL TIME" text to appear in Green through the translucent outer layer of the overlay when it is illuminated from behind by a LED soldered onto the instrument cluster electronic circuit board. When the exterior lighting is turned On, the illumination intensity of the full time indicator is one-step dimmable, which is adjusted using the panel lamps dimmer control ring on the multifunction switch control stalk. The full time indicator is serviced as a unit with the instrument cluster.