Child Seat Tether Attachment: Service and Repair

REMOVAL
The following service procedure applies to vehicles manufactured for sale in North America, which have removable child seat tether anchor brackets that are located on the inner liftgate opening header. Vehicles manufactured for sale in Rest-Of-World (ROW) markets have child tether anchors that are integral to, and are only serviced with the rear seat back panels.
1. Remove the cover from the child tether anchor bezel in the headliner near the liftgate opening header.

Fig.8 Child Tether Anchor Remove/Install:

2. Remove the screw that secures the child tether anchor bracket to the inner liftgate opening header.
3. Remove the child tether anchor bracket from the inner liftgate opening header.

INSTALLATION
The following service procedure applies to vehicles manufactured for sale in North America, which have removable child seat tether anchor brackets that are located on the inner liftgate opening header. Vehicles manufactured for sale in Rest-Of-World (ROW) markets have child tether anchors that are integral to, and are only serviced with the rear seat back panels.
1. Position the child tether anchor bracket onto the inner liftgate opening header.
2. Install and tighten the screw that secures the child tether anchor bracket to the inner liftgate opening header. Tighten the screw to 11.8 Nm (105 in. lbs.).
3. Reinstall the cover into the child tether anchor bezel in the headliner near the liftgate opening header.