Front

REMOVAL - FRONT DISC BRAKE CALIPER
1. Raise and support vehicle.
2. Remove front wheel and tire assembly.
3. Drain small amount of fluid from master cylinder brake reservoir with clean suction gun.

Bottoming Caliper Piston:

4. Bottom caliper pistons into the caliper by prying the caliper over.
5. Remove brake hose banjo bolt and gasket washers. Discard gasket washers.

Caliper Support Spring:

6. Remove the caliper support spring by prying the spring out of the caliper.

Slide Pins:

7. Remove the caliper slide pin bushing caps and remove the slide pins.
8. Remove caliper from the anchor.

Inboard Brake Shoe:

9. Remove the inboard brake shoe.