Rear Seat Cushion Cover

REAR SEAT CUSHION COVER

REMOVAL

1. Remove rear seat cushion.
2. From the underside of the seat, disengage J -straps attaching cover to seat cushion base panel.

Fig. 14:

3. Remove push-in fasteners attaching cushion cover to seat cushion base panel (Fig. 14).
4. Roll back cover.
5. Disengage hog rings attaching cushion cover to seat cushion foam pad.
6. Separate cushion cover from seat cushion foam pad.

INSTALLATION

1. Position cushion cover on seat cushion foam pad.
2. Engage hog rings attaching cushion cover to seat cushion foam pad.
3. Align cushion cover and engage J-straps attaching cushion cover to seat cushion base panel.
4. Install push-in fasteners attaching cushion cover to seat cushion base panel.
5. Install rear seat cushion.