LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2000 >> Wrangler Sport, Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension >> Removal & Installation >> Upper Suspension Arm >> Removal

Upper Suspension Arm: Removal

  1. Raise and support the vehicle.
  2. Remove the parking brake cable/bracket and ABS wiring bracket from the arm, if equipped. See Figure .
  3. Remove the upper suspension arm nut and bolt from the axle bracket.
  4. Remove the nut and bolt from the frame rail bracket and remove the upper suspension arm.

scientia non olet · About LEMON Manuals