LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2000 >> Cherokee Sport, 4D Utility, RWD, Automatic >> Labor Times >> Other Variant >> Brakes >> Mechanical - Hydraulic >> Brake Shoes &/Or Pads >> Remove & Replace

Brake Shoes &/Or Pads: Remove & Replace

WARNING: This page is about the Cherokee Classic, 2D Pickup, which is a different variant/trim than selected.
Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies ToNoteStandard HoursWarranty HoursSkill Level
All2.2B
Front,Both Sides1.0B
Rear,Both Sides1.4B
Combination Procedure: AXLE OR WHEEL BEARING: Replace:
Rear,One Side1.1B
Combination Procedure: AXLE SEAL: Replace:
Rear,One Side0.6B
Combination Procedure: BRAKE HOSE: Replace:
Includes: Bleed Brake System.
Each Additional0.2B
One0.3B
Combination Procedure: CALIPER: Overhaul:
Includes: Bleed Brake System.
One0.9B
Combination Procedure: CALIPER: Replace:
Includes: Bleed Brake System.
One0.7B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
0.5B
Combination Procedure: WHEEL BEARING: Replace:
RWD, Front,One,WHEEL0.5B
Combination Procedure: WHEEL CYLINDER: Overhaul:
Includes: Bleed Brake System.
One,Off Vehicle0.9B
One,On Vehicle0.7B
Combination Procedure: WHEEL CYLINDER: Replace:
Includes: Bleed Brake System.
One0.7B