Air Bag Indicator Light Test
- If AIR BAG warning light illuminates for 12 seconds or more, or stays on all the time, a system malfunction exists and trouble code will be stored. For air bag system testing procedures, see the AIR BAG RESTRAINT SYSTEM article.
- If air bag indicator light does not illuminate when ignition is on, replace air bag indicator bulb and retest. If air bag indicator light still does not illuminate, perform PRELIMINARY DIAGNOSIS .
- If after performing PRELIMINARY DIAGNOSIS and ACTUATOR TEST , air bag indicator light and instrument cluster circuitry is okay, diagnosis of air bag system and Chrysler Collision Detection (CCD) data bus should be performed.
- For air bag system testing procedures, see the AIR BAG RESTRAINT SYSTEM article. For CCD data bus testing, check for opens and shorts in CCD data bus circuits. See WIRING DIAGRAM .