LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Grand Cherokee Limited, 5.2 Y >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine Controls - Tests W/Codes - 3.5L) >> Verification Tests >> Test VER-1 - Verification Procedure

Test VER-1 - Verification Procedure

WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect vehicle to ensure all engine components are connected. Reassemble and reconnect components as necessary. Inspect engine oil for fuel contamination. Change oil and filter if necessary. Attempt to start engine.
  2. If engine does not start, check if any TECH SERVICE BULLETINS (TSBs) apply to vehicle and return to TEST TC-1A  , if necessary.
  3. If engine starts and Powertrain Control Module (PCM) is changed, repair is complete.
  4. If engine starts and PCM is not changed, connect DRB to data link connector and erase trouble codes. Repair is complete.
scientia non olet · About LEMON Manuals