Test TC-39B - EGR Solenoid Circuit

WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For circuit & connector terminal identification, see CONNECTOR IDENTIFICATION DIRECTORY TABLE . For wiring diagrams, see WIRING DIAGRAMS section. After each repair, perform TEST VER-2 .

Using an external ohmmeter, check resistance across EGR solenoid terminals. If resistance is more than 5 ohms, repair open Light Green/Black wire. If resistance is less than 5 ohms, replace EGR solenoid, and replace fused No. 20.