Clearing Trouble Codes
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES
article in the GENERAL INFORMATION section before disconnecting battery.
- If DRB is not available, go to next step. If DRB is available, select FUEL/IGNITION. Select ADJUSTMENTS. Follow DRB prompts to erase trouble codes.
- Fault codes may be cleared by disconnecting negative battery cable for at least 15 seconds, allowing PCM to clear trouble codes.