LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Grand Cherokee Limited, 5.2 Y >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Controls - Tests W/Codes - 3.0L) >> Verification Tests >> Verification Procedure VER-1

Verification Procedure VER-1

WARNING: This page is about a different car, the 1994 Plymouth Sundance, 1994 Plymouth Acclaim, 1994 Dodge Spirit, 1994 Dodge Shadow, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect vehicle to ensure all engine components are connected. Reassemble and reconnect components as necessary. Inspect engine oil for fuel contamination. Change oil and filter if necessary. Attempt to start engine.
  2. If engine does not start, check if any TECHNICAL SERVICE BULLETINS (TSBs) apply to vehicle and return to TEST TC-1A  , if necessary.
  3. If engine starts and Powertrain Control Module (PCM) was changed, connect DRB to engine diagnostic connector and erase trouble codes. Repair is complete.
  4. If engine starts and PCM was not changed, connect DRB to engine diagnostic connector and erase trouble codes. Repair is complete.
scientia non olet · About LEMON Manuals