LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Grand Cherokee Limited, 5.2 Y >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Controls - Tests W/Codes - 3.0L) >> Self-Diagnostic System >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 1994 Plymouth Sundance, 1994 Plymouth Acclaim, 1994 Dodge Spirit, 1994 Dodge Shadow, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: DO NOT skip any steps in self-diagnostic tests or incorrect diagnosis may result. Ensure self-diagnostic tests apply to engine being tested.

If no trouble codes were found while performing BASIC DIAGNOSTIC PROCEDURES, proceed with self-diagnostics. Always perform a visual inspection before attempting to diagnose engine control system problems. See VISUAL INSPECTION  . Enter on-board diagnostics, and retrieve trouble code(s) using CHECK ENGINE light or DRB. See ENTERING ON-BOARD DIAGNOSTICS. If trouble codes are not present and/or DRB (Diagnostic Readout Box) is used, proceed to TEST TC-1A  . Perform indicated VERIFICATION PROCEDURE test after repairs. See SELF-DIAGNOSTIC TESTS DIRECTORY table.