Oxygen (O2) Sensor (1.8L)
WARNING: This page is about a different car, the 1994 Plymouth Laser and 1994 Eagle Talon. However, it is still accessible from the selected car via links, so may be relevant.
- O2 sensor is located at outlet of exhaust manifold. Warm engine until coolant temperature reaches 176-194°F (80-90°C).
- Disconnect O2 sensor connector and connect a voltmeter to connector. With engine speed greater than 1300 RPM, measure O2 sensor output voltage. Output voltage should be .6-1.0 volt. If output voltage is not within specification, replace O2 sensor.