LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Grand Cherokee Limited, 5.2 Y >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Engine Controls - System/Component Tests) >> Emission Systems & Sub-Systems >> Exhaust Gas RECIRCULATION (EGR) >> Thermovalve (2.0L Federal & Canada)

Thermovalve (2.0L Federal & Canada)

WARNING: This page is about a different car, the 1994 Plymouth Laser and 1994 Eagle Talon. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mark vacuum hoses for installation reference. Disconnect vacuum hoses from thermovalve. Connect a hand-held vacuum pump to one thermovalve fitting and apply vacuum.
  2. With engine coolant temperature less than 122°F (50°C), vacuum should not hold. With engine coolant temperature greater than 176°F (80°C), vacuum should hold. Replace thermovalve if it does not function as described.