EGR Temperature Sensor (1.8L & 2.0L California)
WARNING: This page is about a different car, the 1994 Plymouth Laser and 1994 Eagle Talon. However, it is still accessible from the selected car via links, so may be relevant.
- Remove EGR temperature sensor located below EGR valve. Place sensing portion of EGR temperature sensor in water.
- Gradually heat water and read resistance values across terminals. See TESTING EGR TEMPERATURE SENSOR table. Replace EGR temperature sensor if resistance is not within specification.
TESTING EGR TEMPERATURE SENSOR
| Temperature: °F (°C) | Ohms |
|---|---|
| 122 (50) | 6000-8300 |
| 212 (100) | 1100-1400 |