Test 33A - Correcting Abs Warning Lamp (Amber) That Does Not
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
GLOW AT START-UP
Using DRB, read fault messages. Repair faults as necessary. Perform TEST VER-1A. If no other fault messages are present, disconnect ABS warning light diode, located above parking brake assembly. Inspect connector. If connector is okay, replace ABS diode. Perform TEST VER-1A. If connector is damaged, repair as necessary. Perform TEST VER-1A.