Test 14C - Main Relay/Power Circuit Failure
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Ensure DRB is NOT in TEVES ABS diagnostic mode in this test.
- Perform several ABS stops and traction control starts. Inspect ABS fuse. If fuse is okay, system is operating properly at this time. Perform TEST VER-1A. If fuse is open, go to next step.
- Inspect wiring harness between ABS relay and CAB for damage. If wiring harness is faulty, repair as necessary. Perform TEST VER-1A. If wiring harness is okay, replace HCU. Perform TEST VER-1A.