Rear Wheel Speed Sensor: Installation

WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Coat sensor with high-temperature multipurpose grease before installing. Tighten sensor screw to 60 INCH lbs. (7 N.m). There is no air gap adjustment.

Fig 1: Locating Rear Speed Sensor Connector

Courtesy of CHRYSLER CORP.