Controller Anti-Lock Brake (Cab): Removal
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
Ensure ignition switch is in OFF position. Remove HCU. See HYDRAULIC CONTROL UNIT. Remove 2 CAB-to-HCU bolts. Press down on CAB-to-HCU retaining clip. Remove CAB from HCU by pulling it straight out of HCU connector. DO NOT twist CAB while removing it from HCU connector.