Controller Anti-Lock Brake (Cab): Installation
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
To install, push CAB straight into connector until CAB seats and retaining clip is latched. Install 2 CAB-to-HCU bolts. Tighten bolts to 106 INCH lbs. (12 N.m). Install HCU. See HYDRAULIC CONTROL UNIT. To complete installation, reverse removal procedure.