Replacing Terminals
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
Using a Super Crimp FT (29564) tool, strip about 1/4" (1/8" on pin header terminals) of insulation to allow terminal wire grips to cover wire strands. Crimp and apply 60/40 rosin core solder to grip area of terminal. See Fig 1 .