LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Grand Cherokee Limited, 5.2 Y >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Air Bag Restraint System) >> Removal & Installation >> Driver-Side Air Bag Module & Steering Wheel >> Removal

Driver-Side Air Bag Module & Steering Wheel: Removal

WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see SERVICE PRECAUTIONS. Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Driver-side air bag module is mounted on face of steering wheel. See Fig 1 . Position wheels in straight ahead position. Rotate steering wheel half turn (180 degrees) to right (clockwise), and lock steering wheel. Remove cruise control switches (if equipped) or covers from steering wheel back shroud, and disconnect wires.
  3. Remove 2 bolts attaching air bag module to steering wheel. Lift air bag module and disconnect electrical connectors. Remove air bag module. Using Puller (C3428B), remove steering wheel.
Fig 1: Removing Driver-Side Air Bag Module
G93C75459Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals