Removal & Installation (New Yorker)
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
- Open front door and remove left end cover. Remove headlight switch bezel and upper outlet bezel. Remove wood trim bezel in center of instrument panel and move bezel aside. Remove cluster bezel screws. Pull straight rearward to disengage bezel attaching clips.
- Disconnect wiring connector from message center. Replace light bulbs (as necessary). To install, reverse removal procedure.