Standard Instrument Cluster
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
Standard instrument cluster is available in 3 types depending on model. All clusters are electro-mechanical type, receiving most of their information from Body or Timing Controller Module via Chrysler Collision Detection (CCD) bus. Instrument cluster consists of speedometer, odometer/trip odometer, tachometer, fuel/temperature gauge and gear selector indicator. Gauges are magnetic air-core type.
When ignition switch is OFF, gauge pointers should rest at or below the low graduation. Gauge readings are accurate ONLY when ignition switch is in ON position.