Intake Manifold: Inspection
WARNING: This page is about a different car, the 1994 Plymouth Sundance, 1994 Plymouth Acclaim, 1994 Dodge Spirit, 1994 Dodge Shadow, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
Check for damage and cracks on all mounting surfaces. Check for clogged coolant and fuel passages. Check air intake plenum and cylinder head mounting surfaces for warpage. Repair as necessary if warpage exceeds specification. See INTAKE MANIFOLD WARPAGE table.
INTAKE MANIFOLD WARPAGE
| Application | In. (mm) | |
|---|---|---|
| Air Intake Plenum Surface | ||
| Standard | .004 (.10) | |
| Maximum | .008 (.20) | |
| Cylinder Head Surface | ||
| Standard | .003 (.08) | |
| Maximum | .005 (.13) | |