Cylinder Head Specifications

WARNING: This page is about a different car, the 1994 Plymouth Sundance, 1994 Plymouth Acclaim, 1994 Dodge Spirit, 1994 Dodge Shadow, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER HEAD SPECIFICATIONS

Application

Specification

Maximum Warpage

⁽¹⁾ .002" (.05 mm)

Valve Seats

Seat Angle

44°

Seat Width

.035-.051" (.90-1.30 mm)

Valve Guides

Intake Valve

Valve Guide Length

1.732 (44.00)

Valve Guide I.D.

.3149-.3157" (8.000-8.018 mm)

Valve Stem-To-Guide Clearance

⁽²⁾ .001-.002" (.03-.05 mm)

Exhaust Valve

Valve Guide Length

1.889 (48.00)

Valve Guide I.D.

.3149-.3157" (8.000-8.018 mm)

Valve Stem-To-Guide Clearance

⁽³⁾ .002-.004" (.05-.10 mm)

⁽¹⁾	Service limit is .003" (.08 mm). Maximum combined total grind limit of cylinder head and cylinder block is .008" (.20 mm).

⁽²⁾	Wear limit is .004" (.10 mm).

⁽³⁾	Wear limit is .006" (.15 mm).