Cylinder Block Specifications

WARNING: This page is about a different car, the 1994 Plymouth Sundance, 1994 Plymouth Acclaim, 1994 Dodge Spirit, 1994 Dodge Shadow, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER BLOCK SPECIFICATIONS

Application

In. (mm)

Cylinder Bore

Standard Diameter

3.5858-3.5866 (91.080-91.100)

Maximum Taper & Out-Of-Round

.0008 (.020)

Maximum Deck Warpage

⁽¹⁾ .002 (.05)

⁽¹⁾	Service limit is .003" (.08 mm). Maximum combined total grind limit of cylinder head and cylinder block is .008" (.20 mm).