LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Grand Cherokee Limited, 5.2 Y >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (3.0L V6 - VIN [3]) >> Engine Oiling >> Oil Pump >> Reassembly & Installation

Reassembly & Installation

WARNING: This page is about a different car, the 1994 Plymouth Sundance, 1994 Plymouth Acclaim, 1994 Dodge Spirit, 1994 Dodge Shadow, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.

To reassemble, reverse disassembly procedure. Install components in original locations. If oil seal is removed from oil pump case, use Seal Installer (MB998306) to install NEW seal. Lubricate seal lip with oil before installing. To install, reverse removal procedure. Install bolts in original locations. See Figure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals