Combination Switch

WARNING: This page is about a different car, the 1994 Plymouth Sundance, 1994 Plymouth Acclaim, 1994 Dodge Spirit, 1994 Dodge Shadow, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Remove tilt lever, if equipped. Remove upper and lower column covers. Disconnect combination switch connector. Check for continuity between specified terminals. See COMBINATION SWITCH TURN SIGNAL TESTING and COMBINATION SWITCH LOW/HIGH BEAM TESTING . See Fig 1 . Replace combination switch if continuity is not as specified.

COMBINATION SWITCH TURN SIGNAL TESTING

Turn Signal

Hazard Warning

Continuity Between

Neutral

Off

12, 14 & 15

Left

Off

12 & 14; 15, 16 & 17; ⁽¹⁾ 22 & 23

Right

Off

11, 12 & 17; 14 & 15; ⁽¹⁾ 23 & 24

Neutral

11, 12, 13, 15 & 16

⁽¹⁾	With optional cornering lights.

COMBINATION SWITCH LOW/HIGH BEAM TESTING

Switch Position	Continuity Between
Low Beam	18 & 19
High Beam	19 & 20
High Beam Passing	20 & 21

Fig 1: Identifying Combination Switch Terminals

Courtesy of CHRYSLER CORP.