LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Grand Cherokee Limited, 5.2 Y >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Alternator & Regulator) >> Self-Diagnostic System >> Entering On-Board Diagnostics >> Erasing Trouble Codes Using DRB

Erasing Trouble Codes Using DRB

WARNING: This page is about a different car, the 1994 Plymouth Sundance, 1994 Plymouth Acclaim, 1994 Dodge Spirit, 1994 Dodge Shadow, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure all trouble codes are written down before erasing. Press ATM key. At DRB display, press "2" (ERASE) key. DRB will display: ERASE TROUBLE CODES ARE YOU SURE? (ENTER TO ERASE). Press ENTER key to erase all trouble codes.
  2. When DRB is finished erasing trouble codes, it will display TROUBLE CODES ERASED. This display will remain until ATM key is pressed. After ATM key is pressed, display will return to CHARGING MENU screen.
scientia non olet · About LEMON Manuals