Starter Specifications
WARNING: This page is about a different car, the 1995 Jeep Wrangler, 1995 Jeep Grand Cherokee, and 1995 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
BOSCH STARTER SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Cranking Test | ||
| Test Voltage | 12.5 Volts | |
| Minimum Voltage | 9.6 Volts | |
| Amps | 160 Amps | |
| No-Load Test @ 11.5 Volts | ||
| Maximum Amps | 80 Amps | |
| Minimum RPM | 2500 RPM | |
| Solenoid Hold-In Test | ||
| Winding Voltage | 3.5 Volts (Max.) | |
| Solenoid Pull-In Test | ||
| Winding Voltage | 7.8 Volts (Max.) | |
MITSUBISHI STARTER SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Cranking Test | ||
| Test Voltage | 12.5 Volts | |
| Minimum Voltage | 9.6 Volts | |
| Amps | 130 | |
| No-Load Test @ 11.5 Volts | ||
| Maximum Amps | 90 Amps | |
| Minimum RPM | 2600 RPM | |
| Solenoid Hold-In Test | ||
| Winding Voltage | 2.6-3.5 Volts (Max.) | |
| Solenoid Pull-In Test | ||
| Winding Voltage | 6.0-7.8 Volts (Max.) | |