LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Grand Cherokee Limited, 5.2 Y >> Repair and Diagnosis >> External Pages >> Different car >> Section 210 (Starter) >> Removal & Installation >> Starter >> Removal & Installation (Cherokee & Wrangler - 4.0L)

Removal & Installation (Cherokee & Wrangler - 4.0L)

WARNING: This page is about a different car, the 1995 Jeep Wrangler, 1995 Jeep Grand Cherokee, and 1995 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Raise and support vehicle. Disconnect battery cable and solenoid feed wire from solenoid. Remove starter lower mounting bolt. Remove starter upper mounting bolt and remove starter. To install, reverse removal procedure. See TORQUE SPECIFICATIONS  .

scientia non olet · About LEMON Manuals