Continuity Test
WARNING: This page is about a different car, the 1995 Jeep Wrangler, 1995 Jeep Grand Cherokee, and 1995 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect wire from solenoid field coil terminal (large terminal connected to starter body). Using an ohmmeter, test for continuity between field terminal and solenoid terminal (small terminal). Continuity should exist.
- Test for continuity between solenoid terminal and solenoid housing. Continuity should exist. If continuity does not exist in either test, solenoid has open circuit. Replace solenoid.