Power Brake Booster: Removal
WARNING: This page is about a different car, the 1994 Plymouth Sundance, 1994 Plymouth Acclaim, 1994 Dodge Spirit, 1994 Dodge Shadow, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect vehicle battery. Disconnect vacuum hose at power brake unit check valve (DO NOT remove check valve from power brake unit). Remove throttle cable retaining clip and move cable aside.
- Remove master cylinder. Working under instrument panel, disconnect master cylinder pushrod retainer clip and discard. Remove 4 nuts attaching booster to firewall. Remove brackets on steel heater water pipe at left firewall and left frame rail.
- On manual transmission models, remove clutch cable bracket at shock tower and move aside. On all models, remove power brake unit from engine compartment.