LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Grand Cherokee Limited, 5.2 Y >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Disc & Drum) >> Bleeding Brake System >> Bleeding Procedures >> Pressure Bleeding

Pressure Bleeding

WARNING: This page is about a different car, the 1994 Plymouth Sundance, 1994 Plymouth Acclaim, 1994 Dodge Spirit, 1994 Dodge Shadow, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean master cylinder cap and surrounding area. Remove cap. With pressure tank at least half full, connect tank to master cylinder using proper adapter(s).
  2. Attach bleeder hose to first bleeder valve to be serviced (RR). Place other end of hose in clean transparent container. Partially fill container with clean brake fluid. Submerge end of hose in fluid.
  3. Open release valve on pressure bleeder. Open bleeder valve 1-2 turns, noting fluid flow. When flow is clear and free of bubbles, close bleeder valve securely.
  4. Repeat procedure for remaining bleeder valves in sequence. See BLEEDING SEQUENCE . Close release valve on pressure bleeder. Remove pressure tank from master cylinder. Check fluid level of master cylinder reservoir.
scientia non olet · About LEMON Manuals