Bleeding Procedures: Notes
WARNING: This page is about a different car, the 1994 Plymouth Sundance, 1994 Plymouth Acclaim, 1994 Dodge Spirit, 1994 Dodge Shadow, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
Hydraulic system bleeding is necessary whenever air is introduced into system. Bleeding may be done manually or by using pressure bleeding equipment. Bleed brakes at all 4 wheels if master cylinder has run dry, been replaced or if hydraulic system has been opened for overhauled.
NOTE:
For vehicles with Anti-Lock Brake Systems (ABS), see appropriate ANTI-LOCK BRAKE SYSTEM
article in BRAKES.