Removal & Installation (AP Body)
WARNING: This page is about a different car, the 1994 Plymouth Sundance and 1994 Dodge Shadow. However, it is still accessible from the selected car via links, so may be relevant.
- Open hood, and remove wiper arms. Remove cowl top plastic cover. Remove retaining nuts from pivot mounting studs. Disconnect wiper motor wiring harness.
- Remove wiper motor mounting bracket-to-body bolts. Remove wiper motor, bracket and linkage from cowl plenum. To install, reverse removal procedure.
NOTE:
If removal of nut from motor shaft is required for service, DO NOT
rotate motor from park position.