Replacing Terminals
WARNING: This page is about a different car, the 1994 Plymouth Sundance, 1994 Plymouth Acclaim, 1994 Dodge Spirit, 1994 Dodge Shadow, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
Using a Super Crimp FT (29564) tool, strip about 1/4" (1/8" on pin header terminals) of insulation to allow terminal wire grips to cover wire strands. Crimp and apply 60/40 rosin core solder to grip area of terminal. See Fig 1 .